International Scooterist BBS (archived discussion forums) |
Custom Search
|
Re: one last part to remove
Posted by Scooter Md from aohr28g9y9t4.bc.hsia.telus.net (64.180.71.70) on Saturday, October 13, 2001 at 0:28AM :
In Reply to: one last part to remove posted by gayjeff from proxy2-external.peoria1.il.home.com (24.4.255.93) on Saturday, October 13, 2001 at 0:47AM :
Pry the tab washer away from the nut on the back of the case; remove the nut; hold a cup under the end of the spring gear (a spray paint can lid works good); tap the spring gear shaft into the case; all the little needle bearing will fall into the cup (should have 21); grab the shaft where the needles were and pull the spring gear assembly out. When you re-install the assembly use grease to stick the needles onto the shaft.
Follow Ups:
|